Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
These operating instructions are only valid for the device type
conjunction with the approved heating cable
Schlüter
-DITRA-HEAT
of our
®
1. Safety
1.1 Intended use
Schlüter
The cable tester
of the heating cables
is not permitted.
1.2 Foreseeable misuse
Any use exceeding or differing from the intended purpose is considered misuse.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
It must be consulted in all cases where symbol
CAUTION! RISK OF MISUSE!
Misuse of the resistance measuring device can lead to hazardous situations.
• Never use the device to measure mains voltage
• Never use a damaged device
• Measure known resistance with the meter to verify that the
meter is working properly. If the meter is working abnormally, stop using it
immediately.
Batteries
WARNING!
Risk of injury in case of improper battery handling!
Improper handling of batteries may cause batteries to explode or harmful fluid
to leak from the batteries. This fluid may cause severe skin burns in the event
of skin contact, severe poisoning in the event of ingestion, and blindness in the
event of eye contact.
• Always use a suitable charging device in case of rechargeable batteries.
• Always insert the battery into the resistance measuring device or the battery
charger with proper polarity (+/-). Never attempt to force the batteries into
such devices.
• Never attempt to solder or repair batteries or to change, modify, or disassem-
ble them in any way.
• Always keep batteries out of the reach of unauthorized persons (children).
thermostats.
-DITRA-HEAT-E-CT
®
Schlüter
-DITRA-HEAT-E-HK
®
Schlüter
Schlüter
-DITRA-HEAT-E-HK
®
is exclusively designed to measure the resistance
in floor and wall installations. Any other use
is marked!
-DITRA-HEAT-E-CT
®
and the remote sensor
in
7
Advertenties
Inhoudsopgave
