Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INTRODUCTION
The thermostat is an electronic PWM/PI thermostat for temperature
control by means of an NTC sensor located either externally or
internally within the thermostat.
The thermostat is for flush mounting in a wall socket. A baseplate
for wall mounting is also available.
Fig. 1 - Content
• Thermostat
• Sensor
• Display disassembly tool
This thermostat can be used as a controller for electric room
heating pursuant to EN50559.
Product programme
DH E RT2 / BW
DH E RT5 / BW
IMPORTANT SAFETY INSTRUCTIONS
Fig. 2 - Warnings
To avoid electric shock, disconnect the heating system
power supply at the main panel before carrying out any
work on this thermostat and associated components.
Installation must be carried out by qualified personnel in accord-
ance with appropriate statutory regulations (where required by law).
Installation must comply with national and/or local electrical codes.
© 2020. All rights reserved. Used under license by Schlüter-Systems KG
DH E RT2 / BW
(MCD5-1999-SLP3)
DH E RT5 / BW
(MWD5-1999-SLP3)
Instruction
English
Clock-thermostat with two sensors:
floor sensor and built-in room sensor.
WiFi Clock-thermostat with two sensors:
floor sensor and built-in room sensor.
7
Advertenties
Inhoudsopgave
