Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
∙ Fill the empty water reservoir using
the measuring cup provided. Fill to the
indicated "Max" level only.
∙ C lose the water fill hole.
General information about ironing
∙ Always check first whether a label with
ironing instructions is attached to the
article to be ironed.
∙ The meaning of the ironing symbols is
as follows:
•
synthetics
(low temperature)
••
silk and wool
(medium temperature)
••• cotton and linen
(high temperature)
∙ These markings can also be found on
the temperature control knob of the
steam iron in form of dot symbols.
∙ Laundry to be ironed should be
sorted according to the fabric ironing
temperature. Follow the ironing symbols
and start with the lowest temperature.
∙ When ironing highly sensitive fabrics, or
if you are not sure about the fabrics, you
may carefully test-iron at a non-visible
point, e.g. inside of seam. Start with the
lowest temperature.
∙ If the laundry is being dried in a dryer
before ironing, the temperature should
be adjusted to "iron dry". Very dry fabrics
are difficult to iron.
Before using for the first time
∙ Clean the steam iron before using
for the first time, according to the
instructions given in the paragraph
Cleaning and care. This will result in the
removal of possible dust particles from
the soleplate and subsequently lessen
the smell typically encountered when
first switching on.
∙ Please ensure sufficient ventilation.
Ironing
∙ Steam ironing requires high
temperatures. The temperature level
for steam ironing is indicated on the
temperature control knob.
∙ A fter filling the reservoir with water,
place the steam iron upright on its base
stand and insert the plug into the wall
socket.
∙ Set the temperature control knob to
the required ironing temperature as
indicated by the ironing symbols.
∙ During the heating-up process the
indicator lamp will be on. The lamp
will go out once the required ironing
temperature is reached.
∙ Before ironing any fabrics, the soleplate
should be cleaned by passing it over an
old, clean cotton cloth, while using the
steam jet
function; this helps to flush
out any dirt residues or lint particles
trapped inside the openings in the
soleplate.
∙ The steam function can now be
switched on and off using the steam
selector.
13
Advertenties
Inhoudsopgave
