Advertenties
Beschikbare talen
Beschikbare talen
19 Specifications
Fault
Cause
Spark plug is dirty, damaged or
electrode gap is incorrect.
Resistance at blade is too great. ► Set a higher cutting height.
Engine diffi‐
Lawn mower housing is
cult to start or
blocked.
engine power
deteriorating.
Cutting height is set too low or
rate of feed is too high.
Water in fuel tank and carburet‐
tor or carburettor is blocked.
Fuel tank contaminated.
Air filter dirty.
Spark plug dirty.
Engine over‐
Engine oil level is too low.
heating.
Cooling ribs dirty.
Lawn mower
Blade is damaged.
vibrates
excessively.
Blade is not correctly attached.
Grass is not
Blade is blunt or worn.
being cut
cleanly.
19 Specifications
19.1
STIHL RM 4.0 RT Lawn Mower
– Engine type: Kohler HD675
– Displacement: 149 cm³
– Power: 2.2 KW (3.0 hp) at 2800 rpm
– Speed: 2800 rpm
– Maximum fuel tank capacity: 1400 cm³ (1.4 l)
– Weight: 35 kg
– Cutting width: 53 cm
19.2
Blade
– Minimum thickness a: 2.5 mm
– Minimum width b: 55 mm
– Sharpening angle: 30°
19.3
Sound Values and Vibration
Values
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2.2 dB(A). The K value for the vibration value is
1.60 m/s².
– Sound pressure level L
ance with EN ISO 5395-2: 79 dB(A)
0478-111-9655-B
measured in accord‐
pA
Remedy
► Clean or replace spark plug.
► Adjust electrode gap.
► Start engine in lower grass.
Clean lawn mower.
Adapt cutting height or mow more slowly.
Empty fuel tank, clean fuel line and carburettor.
Consult a STIHL specialist dealer.
Clean or replace air filter as described in engine
instruction manual.
Clean or replace spark plug.
Add or change engine oil as described in engine
instruction manual.
Clean lawn mower.
Replace blade.
Attach blade.
Sharpen or replace blade.
– Guaranteed sound power level L
ured in accordance with 2000/14/
EC / S.I. 2001/1701: 93 dB(A)
– Vibration value a
with EN 12096, EN 20643, EN ISO 5395-2,
handlebar: 3.20 m/s²
For information on compliance with Employers'
Vibration Directive 2002/44/EC and
S.I. 2005/1093, see www.stihl.com/vib.
19.4
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Spare Parts and Accesso‐
ries
20.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
meas‐
WAd
measured in accordance
hv
English
33
Advertenties
