Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
continuously for 3 seconds and then it will turn off, indicating the proper learning.
RADIO- CONTROL (Fig. 5)
The button ON/OFF on the hood turn on simultaneously lights and the motor at the second speed or it turns off every-
thing. After 100 working hours of the suction motor the red led will start to flash indicating the need to wash metals
filters. To cancel the filters alarm, when the suction motor is switched off, you must press button ON/OFF long
enough.
Radio control:
The hoods with the standard remote control are already configured.
For optional and/or replacement remote controls it is necessary to start the learning process. With the hood turned
off, keep button "ON/OFF" for 5sec. The remote control learning is indicated with the flashing alarm filters led. If
within one minute arrive a valid remote control code (sent by pressing any button of the remote control ) the led will
be on continuously for 3 seconds and then it will turn off, indicating the proper learning.
ROTARY CONTROL (Fig.6)
In the rotary control version there are three knobs:
> One knob for switching light decorative on and off
> One knob for switching lights on and off
> One knob for speed selection (1^,2^,3^,4^) and turning the motor off.
ROTARY CONTROL (Fig.7)
FILTERS ALARM: yellow led flashes (100h working)
RESET: PUSH 10 SEC. (with the hood turn off)
EN - 10
Advertenties
Inhoudsopgave
