Advertenties
Beschikbare talen
Beschikbare talen
.
240 volt 50 Hz machines are fitted with a 13 amp. 3 pin moulded
plug. the plug is fitted with a 10 amp. detachable fuse. The correct
replacement for the fuse is identified by marking or colour
coding. Only fuses that are ASTA approved to BS 1362 should
be fitted. Never use the plug without the fuse cover fitted.
Replacement fuse covers are available at any electrical retail
outlet. If the available socket outlet is not suitable for the plug
supplied, the plug must be cut off and an appropriate plug fitted.
The plug thus cut off MUST BE DESTROYED for safety reasons
before being disposed of. Machines built for other voltages and
frequencies are not normally supplied with a fitted plug. If it is
necessary to fit a plug, the wires in this power supply cord are
coloured in accordance with the following code:
BLUE-NEUTRAL
BROWN-LIVE
To connect the new plug:
If using a three-pin plug, do not make any connection to the the
terminal in the plug which is marked with the letter 'E' or by the
safety earth symbol or coloured green or green & yellow. This
machine is double-insulated and no earth connection is neces-
sary. The wire which is coloured blue must be connected to the
terminal in the plug which is marked with the letter 'N' or is
coloured black or blue.
The wire which is coloured brown must be connected to the
terminal in the plug which is marked with the letter 'L' or is
coloured red or brown. If the plug to be fitted does not conform
to the above notation then consult a qualified electrician.
Advertenties
