Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
12)
Once the desired pause time has lapsed, press the P/P button. The motor then starts the closing manoeuvre.
13)
During closure, press the P/P button at the point at which you want the gate to decelerate (optional)*.
14)
Once the closing stroke is complete, the motor stops. End of programming, led L1 switches off.
* If points 10 and 13 are not carried out, a standard deceleration of approximately 50 cm will be set.
FULL opening programming: Typology 2
MOTOR WITHOUT ELECTRIC LIMIT SWITCHES AND ENCODER
1
9
1)
Shut off power supply to control unit.
2)
Position the gate or door at mid-travel.
3)
Press PROG/STOP button.
on.
off the power, invert the motor phases and the limit switches and repeat the procedure.
8,9)
Once the end stop is reached, press the P/P button; the motor stops and then the opening stroke starts automatically.
10)
During the opening, press the P/P button at the point at which you want to the gate to decelerate.
11)
Once the opening stroke is complete, press the P/P button. The motor stops.
12)
The control unit starts the pause time registration phase.
13)
Once the desired pause time has lapsed, press the P/P button. The motor then starts the closing manoeuvre.
14)
During closure, press the P/P button at the point at which you want the gate to decelerate.
15)
Once the closing stroke is complete, press the P/P button to stop the motor.
16)
End of programming, LED 1 switches off.
PEDESTRIAN opening programming: Typology 1
AUTOMATION WITH ELECTRIC LIMIT SWITCHES
46
2
3
10
11
2
1
7
8
PED
4
5
13
12
3
4
9
10
PED
6
7
15
14
5
6
12
11
8
16
Advertenties
Inhoudsopgave
