Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION - General information
The below description goes with the image on page 2.
1. Lid
2. Max. level of warm milk
3. Max. level of milk foam
4. Min. filling level
5. Axle
OPERATION - Before first use
1. Take the appliance out of the packaging.
2. Clean the appliance (see 'Cleaning and maintenance').
OPERATION - Use
With this milk frother you can:
Frothing milk
1. Place the froth beater (10) on the axle (5).
2. Pour the milk in the can (6) (no more than the lower MAX-indication
3. Put the plug (9) into the wall socket and place the can on the power base (8).
4. Switch the on/off switch (7) to 'I'. The pilot light will illuminate and the appliance starts working.
5. The appliance switches off by itself when the milk has been frothed.
6. Remove the can from the power base and pour the milk.
7. If the milk is not poured out of the can or is not completely poured out, the device will start operating
again as long as the milk temperature falls below 50 °C.
8. After use, turn the on/off switch to '0' and remove the plug from the wall socket.
Warming milk
1. Take the froth beater (10) from the axle (5).
2. Pour the milk in the can (6) (no more than the higher MAX-indication) and place the lid (1).
3. Put the plug (9) into the wall socket and place the can on the power base (8).
4. Switch the on/off switch (7) to 'I'. The pilot light will illuminate and the appliance starts working.
5. The appliance switches off by itself when the milk has been heated to 65°C.
6. Remove the can from the power base and pour the milk.
7. If the milk is not poured out of the can or is not completely poured out, the device will start operating
again as long as the milk temperature falls below 50 °C.
8. After use, turn the on/off switch to '0' and remove the plug from the wall socket.
Tips:
•
With small amounts of milk (to MIN-indication) you will get a better result.
•
Use preferably cappuccino milk (available in any supermarket) or long-life whole milk.
•
For firmer milk foam use the device once more.
•
For variation try anise milk or chocolate milk (or milk with a spoonful of cocoa powder).
WARNING:
•
Never switch on the appliance if the can is filled with less milk than the MIN-indication.
•
Allow the appliance to cool down before using it again.
CLEANING AND MAINTENANCE
Clean the appliance and the loose parts thoroughly after each use:
1. Remove the plug from the plug socket.
2. Clean the froth beater (10) in warm soapy water. Rinse the parts with ample water and dry them thoroughly.
3. Fill the jug with water, let this stay for a few minutes and then pour it out. Clean the jug with a damp
cloth. Dry thoroughly after cleaning. Never immerse the appliance in water. Never put the appliance in
a dishwasher. Make sure that the electrical connections do not become damp.
4. Keep the appliance in a dry place.
WARNING:
•
Make sure the plug has been removed from the plug socket before cleaning the appliance.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
•
Never immerse the appliance, the power cord or the plug in water or any other fluid.
6. Can
7. On/off switch
8. Power base
9. Power cord and plug
10. Froth beater
) and place the lid (1).
14
14
EN
EN
Advertenties
Inhoudsopgave
