Advertenties
Beschikbare talen
Beschikbare talen
4. Press the main button several times to select the
relevant ballistic curve, i.e.
-
EU1
to
EU12
or
-
to
, or
US1
US12
if you want the range to be displayed without the impact
point correction (
AbC
) (see p. 36).
-
.
OFF
5. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation, then the display changes first to the
zeroing range setting (
If a ballistic curve is set, after each range measurement
the range value is first displayed for 2s, then the
calculated correction value for 6s.
) and then disappears
SId
SeTTing The zerOing range (
Start with step 1 if you have not previously opened the
menu control, or with step 3 if you have just specified the
ballistic curve and
Sld
1. Press and hold the secondary button (1) (≥3s).
• The display shows
2. Press the secondary button briefly (<2s) twice.
• The display changes to
3. Press the main button (2) several times to select the
required zeroing range.
[m],
-
100
-
200
[m], or
-
[m], or
GEE
-
[y], or
100
-
200
[y], or
-
300
[y].
4. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation, then the display changes first to
and then disappears.
35
)
SId
is still flashing in the display.
.
USEU
bALL
and then to SId.
AbC
Advertenties
