Download Inhoudsopgave Inhoud Print deze pagina
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 51
NOTE
The clock light has a night mode so the display
light will dim between 00:00 and 6:00 hours.
WARNING
In the event of a power failure, your elec-
tronic clock/timer settings will be erased.

Use of the oven

MANUAL OPERATION
After setting the clock, the oven is ready for
use. Select a cooking function and tempera-
ture.
You will notice that the
during cooking to indicate that heat is being
transmitted to the food. This symbol disap-
pears when the selected temperature has
been reached.
Set the controls to
INFORMATION
When you start cooking, your oven will show
the time the oven has been cooking.
OVEN TIMER OPERATION
Programming the Buzzer
1. Touch
or
until the
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
will flash slowly.
3. Once the time has expired, an acoustic
signal will sound for 90 seconds and the
symbol will flash quickly.
symbol lights up
to turn off the oven.
symbol on the
. The
or
. You
symbol
If this happens, turn the function and tem-
perature dials to the
The indication 12:00 will show, and you will
then be able to set the time as described
above.
NOTE
With the Buzzer function, the oven will not
turn off when the time expires.
4. Touch any key to stop the alarm. The
symbol will then disappear.
If you wish to modify the time on the buzzer,
repeat the steps shown. Upon entering the tim-
er control, the time currently remaining will ap-
pear, which you will be able to adjust.
NOTE
With the Buzzer function, the remaining time
will show permanently on the display. With
this programmed function, it is not possible
to view the time or the total programmed
cooking time.
Programming Cooking Time
1. Touch
or
until the
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time.The
will flash slowly.
english
position.
symbol on the
. The
or
. You
symbol
25
User's Guide

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

B6330.0B6120.0H6120.0H6000.0

Inhoudsopgave