Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TFA_No. 30.3066_Anleitung_02_21
MARBELLA – Wireless pool thermometer
• Change the batteries of the pool sensor, when the battery symbol
appears on the lower display next to the pool temperature or on the
pool sensor display.
• Change the batteries of the corresponding transmitter when the bat-
tery symbol "1" or "2" appears on the upper display or on the sensor
display.
• Please note: When the batteries are changed, the contact between the
transmitter and the base station must be restored – so always insert
new batteries into all devices or start the manual search for the trans-
mitter.
11. Troubleshooting
Problem
No indication on the
base station/transmitter
No DCF reception
No reception
of the pool sensor
Display "---"
30
27.02.2021
10:55 Uhr
Solution
➜ Ensure the batteries' polarities are
correct
➜ Change the batteries
➜ Start scanning with the SET/RCC
button
➜ Wait for an attempt reception during
the night
➜ Choose another place for the base
station
➜ Check if there is any source of
interference
➜ Restart the base station according to
the manual
➜ Set the clock manually
➜ No pool sensor installed
➜ Check the batteries of pool sensor
(do not use rechargeable batteries!)
➜ Start the manual search for the pool
sensor:
Press and hold the CHANNEL/SEARCH
button on the base station (while the
indoor values are displayed)
➜ Restart the pool sensor and the base
station according to the manual
Seite 16
MARBELLA – Wireless pool thermometer
➜ Choose another place for the base
➜ Reduce the distance between the
➜ Check if there is any source of
➜ No transmitter installed
No transmitter reception
➜ Check the transmitter batteries
Display "---"
➜ Start manual search:
➜ Restart the transmitter and the base
➜ Choose another place for the trans-
➜ Reduce the distance between the
➜ Check if there is any source of inter-
➜ Change the batteries
Incorrect indication
If your device fails to work despite these measures, contact the retailer
where you purchased the product.
12. Waste disposal
This product has been manufactured using high-grade materials and
components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batter-
ies with ordinary household waste.
As a consumer, you are required by law to take them to
your retail store or to an appropriate collection site
depending on national or local regulations in order to pro-
tect the environment.
station
pool sensor and the base station
interference
(do not use rechargeable batteries!)
Press the CHANNEL/SEARCH button
on the base station for three seconds
(while the values for channel 1 or 2
are displayed) and then press the TX
button in the transmitter's battery
compartment
station according to the manual
mitter and/or the base station
transmitter and the base station
ference
31
Advertenties
Inhoudsopgave
