Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TFA_No. 30.3066_Anleitung_02_21
MARBELLA – Wireless pool thermometer
7. Operation
• Press and hold the + MAX/MIN or – MODE button in setting mode for
fast mode.
• The device will automatically quit the setting mode if no button is
pressed for a few seconds.
7.1 Manual settings
• Press and hold the SET/RCC button in normal mode for three sec-
onds, to enter the setting mode.
• The hour digit will be flashing. Press the + MAX/MIN or – MODE but-
ton to adjust hours.
• Confirm with the SET/RCC button.
• Set minutes in the same way.
• Press the SET/RCC button again to make the settings in the following
sequence: the possibility of the automatically reset of the maximum
and minimum values (AUTO OFF - default) and the temperature unit
°C or °F (°C - default). Press the + MAX/MIN or - MODE button to
adjust.
• Confirm with the SET/RCC button.
• The manually set time is overwritten once the DCF time signal is suc-
cessfully received.
7.1.1 Automatic reset of the maximum and minimum values
• In the setting mode you can activate or deactivate the automatic
reset of the maximum and minimum values.
• AUTO
appears on the display and OFF flashes.
• Press the + MAX/MIN or – MODE button to activate (ON) or deacti-
vate (OFF) the automatic reset.
• If the automatic reset is activated, AUTO appears on the display.
• All maximum and minimum values will be reset automatically every
midnight at 0:00.
7.2 Maximum/Minimum function
7.2.1 Indication of maximum and minimum indoor values
• Press the + MAX/MIN button during the indoor values are shown in
the upper display.
• MAX appears on the upper display.
26
27.02.2021
10:55 Uhr
Seite 14
MARBELLA – Wireless pool thermometer
• You can now get the highest value for the indoor temperature and
humidity.
• Press the + MAX/MIN button again.
• MIN appears on the display.
• You can now get the lowest value for the indoor temperature and
humidity.
• Press the + MAX/MIN button again to return to normal mode.
7.2.2 Indication of maximum and minimum values of the pool
temperature
• The maximum and minimum values of the pool temperature are
shown permanently on the lower display.
7.2.3 Reset of maximum and minimum values
a) Automatic reset
• Provided that in the setting mode the automatic reset is activated
(ON). AUTO appears on the display.
• All maximum and minimum values will be reset automatically every
midnight at 0:00.
• Manual reset is not possible.
b) Manual reset
• Provided that in the setting mode the automatic reset is deactivated
(OFF).
• Indoor maximum and minimum values: Press and hold the – MODE
button during the highest or lowest values are displayed. The values
will be deleted and reset to the current state.
• Maximum and minimum values for the pool temperature: Press
and hold the – MODE button in normal mode. The values will be
deleted and reset to the current state.
8. Positioning and fixing of the base station and the pool sensor
• The base station can be placed onto any flat surface with the foldable
leg or wall mounted at a chosen location with the mounting hole,
both found at the back of the unit. Make sure to avoid the vicinity of
any source of interference such as computer screens, TV sets or
solid metal objects.
27
Advertenties
Inhoudsopgave
