Advertenties
Beschikbare talen
Beschikbare talen
Translation of the Original Instructions.
en
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the machine shall aide in directing your attention to possible haz-
ardous situations when working with this machine.
Symbol, character Explanation
Do not touch the rotating parts of the machine.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
may be danger of injury caused by unintentional starting of the machine.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Danger warning
Confirms the conformity of the power tool with the directives of the European Community.
Confirms the conformity of the power tool with the directives of Great Britain (England,
Wales, Scotland).
Worn out machine and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Rotation direction
(**)
May contain numbers and letters
Character
Unit of measurement,
international
l
mm
1
l
mm
2
kg
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
For your safety.
Do not use the radius grinding module before
you have thoroughly read and completely under-
stood these operating instructions, including the
figures, specifications, and safety regulations.
Read and observe the operating instructions of
the belt grinder GX75/GX752H, to which this
machine is to be mounted.
This Instruction Manual should be kept for later use and
enclosed with the power tool, should it be passed on
or sold.
Unit of measurement,
national
mm
mm
kg
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Explanation
Sanding-belt length
Sanding-belt width
Weight according to EPTA-Procedure 01
Basic and derived units of measurement
from the international system of units SI.
2
For assembly of the radius grinding module to the belt
grinder, use only the fastening material provided. Faulty
assembly can cause the radius grinding module to
loosen from the belt grinder during operation and lead
to serious accidents.
en
9
Advertenties
