Safety Instructions - Victron energy Phoenix 12 250 Handleiding

Verberg thumbnails Zie ook voor Phoenix 12 250:

Inhoudsopgave

Advertenties

Beschikbare talen

1. Safety instructions

WARNING: ELECTRIC SHOCK HAZARD

The product is used in conjunction with a permanent energy source (battery). Input

and/or output terminals may still be dangerously energized, even when the equipment

is switched off. Always disconnect the battery before carrying out maintenance or

servicing the product.

The product has no internal user-serviceable components. Do not remove the front

plate or operate the product if any panels have been removed. All servicing must be

undertaken by qualified personnel.

Please read the installation instructions in the installation manual before installing the

equipment.

This is a Safety Class I product (supplied with a protective grounding terminal). The

chassis must be grounded. A grounding point is located on the outside of the product.

Whenever it is likely that the grounding protection has been damaged, the product

must be turned off and secured against unintended operation; please contact qualified

service staff.

The AC output is isolated from the DC input and the chassis. Local regulations may

require a true neutral. In this case one of the AC output wires must be connected to

the chassis, and the chassis must be connected to a reliable ground. Please note

that a true neutral is needed to ensure correct operation of an earth leakage circuit

breaker.

Ensure that the equipment is used under the correct ambient conditions.

Never operate the product in a wet or dusty environment.

Never use the product where there is a risk of gas or dust explosions.

Ensure there is adequate free space (10 cm) for ventilation around the product and

check that the ventilation vents are not blocked.

Inhoudsopgave

Advertenties

Inhoudsopgave