HUMIDIFY LIGHT
INDICATOR
HIGH & LOW
SILENT
EMPTY THE WATER TANK
There are three ways of emptying the water tank. The fi rst is doing so manually, the second is by
using a manual continious drainage and the third one is with a pump drain.
Only remove the tank when the appliance is not in operation
and unplugged.
MANUAL PROCESS
1.
Remove the tank, see pic 1, from the unit.
2.
Grab on fi rmly to the tank and prevent any water dropping from the tank.
3.
Empty the tank carefully in a sink or other location specifi ed for drainage
water.
4.
Clean the tank if necessary with a dry cloth.
5.
Place the tank in the appliance.
MANUAL CONTINUOUS DRAINAGE
Caution: It is important to use the manual drain when the dehumidifi er is not used for a long
time.
The dehumidifi er has a continuous drainage hole at the
bottom of the machine, see pictures below. Remove
the drain stop
q
and use a plastic drainage tube to
insert in the drainage hole
drainage tube from the bottom of the machine. Make
sure the drainage pipe is straightened out, the water
can be drained from the machine through the drainage
hole.
Don't remove the water tank while the hose is connected.
Manual D 825 PA Smart.indd 31
Manual D 825 PA Smart.indd 31
1. When ambient humidity is ≥80%, it will show a red light.
2. When ambient humidity is ≥56% and ≤78%, it will show a yellow
light.
3. When ambient humidity Is≤54%, it will show a blue light.
When the ambient humidity is over 90%. The display will show HI.
When the ambient humidity is lower than 32%, The display will show
LO.
Press the TIMER button and SPEED button at the same time to turn on/
off the sound. Only the button beeper sound will be mute. The alert
will still make noise to remind user.
w
. Water will go out of the
4
31
10/04/24 18:04
10/04/24 18:04