Download Print deze pagina

Bellarom BKM 1250 A1 Gebruiksaanwijzing pagina 35

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 58
10) Rinse the water tank
to the MAX mark.
11) Push the water tank
button. The pipes are now flushed with clean water.
12) As soon as the water tank
Lungo
slowly in order to quit descaling mode.
Storage
If you do not intend using the appliance for long periods, empty all pipes
(see section "Emptying the system").
Allow the appliance cool down completely before putting it into storage.
Store the appliance at a clean and dry location.
Troubleshooting
Malfunction
The appliance is
not working.
Only hot water is
dispensed.
After pressing the
Espresso
or Lungo
button, no liquid
will be dispensed
from the coffee
dispenser
The appliance
hums.
32
 │ GB│IE
with clean water and then fill it with clean water up
back into the appliance and press the Lungo
is empty, press and hold the Espresso
buttons until the Espresso
Cause
The plug is not inserted into
a mains power socket.
The appliance is not
switched on.
The appliance is defective.
No capsule has been
inserted.
The system might be
clogged.
.
and Lungo
buttons flash
Remedy
Connect the plug to the
power supply.
Switch the appliance on.
Contact the Customer
Service department.
Insert a capsule.
Stop the process by
pressing the Espresso
or Lungo
button.
WAIT 25 SECONDS and
open the capsule compart-
ment
by pulling the
lever
upwards.
Now proceed as
described in the section
"Emptying the system".
BKM 1250 A1
and

Advertenties

loading

Deze handleiding is ook geschikt voor:

273122