Download Print deze pagina

Amica SBSN 397 100 E Gebruiksaanwijzing pagina 18

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 74
CONTROLS
Appliance controls
The control panel is shown in figure 10. It is also shown below for your
reference:
When you plug in the appliance to power, all indicators
light up for 2 seconds.
When you close the door, the display remains backlit for
about 3 minutes and then backlight turns off. To activate
the display, open the door or touch any of the touch sen-
sors.
Adjust the temperature
To adjust the temperature in the refrigerator or freezer
compartment - touch the "Temp.Zone" sensor and the one
ot the compartment symbol will flickering. Now touch the
Temp. sensor repeatedly to cycle through available tem-
perature settings:
Fridge: 5->6->7->8->OF->2->3->4->5
OF (OFF) means that the compartment is completely
turned off.
Freezer: -18->-17->-16->-24->-23->-22->-21->-20->-
19->-18
Touch "OK" to confirm the set temperature or wait 5 sec-
onds.
Fast Freezing
When Fast Freezing is active, the temperature in the freez-
er compartment will be reduced to –32°C. To enable or
disable Fast Freezing, touch the "Function" sensor repeat-
edly to cycle through available functions. When the Fast
Freezing icon flashes, touch "OK" to confirm.
Note: If you do not touch "OK" within 5 seconds, the func-
tion will not be activated. The Fast Freezing function turns
off after 26 hours and the previous temperature setting is
restored.
Smart ECO
When Smart ECO is enabled the temperature is set to +5°C in the refrig-
erator compartment and to –18°C in the freezer compartment. These are
optimal temperature settings. To enable or disable Smart ECO, touch the
"Function" sensor repeatedly to cycle through available functions. When the
Smart ECO icon flashes, touch "OK" to confirm.
Note: If you do not touch "OK" within 5 seconds, the function will not be
activated. Smart ECO will be deactivated when you enable the Holiday or
Fast Freezing function.
Open door alarm
If the door remains open for more than 3 minutes, you will hear beeping.
Touch any sensor on the control panel to mute the beeping. After another
- 18 -

Advertenties

loading