Changing The Transmission Belt - Toro 22205TE Handleiding
Verberg thumbnails
Zie ook voor 22205TE:
- Gebruikershandleiding (36 pagina's) ,
- Gebruikershandleiding (32 pagina's) ,
- Gebruikershandleiding (36 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Figure 47
1. Mark the cable here
Figure 48
1. Slack—11 mm (7/16 inch)
8.
Torque the cable-clamp screw to 11 to 14 N∙m
(99 to 121 in-lb) to lock the adjustment in place.
9.
Install the belt cover with the 4 bolts that you
removed in step 3.
10.
Connect the wire to the spark plug.
11.
Check the operation of the blade-brake clutch.
All manuals and user guides at all-guides.com
Changing the Transmission
Belt
Service Interval: Every 250 hours
g208923
g208920
10.
27
1.
Shut off the engine and wait for all moving parts
to stop.
2.
Disconnect the wire from the spark plug.
3.
Remove the 4 bolts that hold the belt cover to
the machine housing.
Note:
Save the bolts for installing the belt cover
to the machine housing.
4.
Remove the belt cover.
5.
Remove any debris from under the belt cover.
6.
Loosen the bracket and rotate the bracket
forward
(Figure
49).
Note:
The bracket prevents the transmission
from tipping to the point where the transmission
belt comes off.
Figure 49
1. Transmission tension
spring
2. Bracket
3. Transmission
7.
Remove the transmission tension spring.
8.
Remove the transmission belt from the
transmission pulley.
9.
Remove the transmission belt.
To install a new transmission belt, reverse the
steps above.
g196531
4. BBC belt
5. Transmission belt
Advertenties
Hoofdstukken
Inhoudsopgave
