Cleaning the air filter
Warning!
All repairs or works on the appliance must
be carried out by unplugged plug.
Clean the air filter more or less every six
months. This period of time will vary
depending on the specific conditions of the
surroundings the appliance is used in.
This shirt ironer complies with the safety
guidelines established for electrical
appliances. All repairs, modifications and work
of any kind performed on electrical appliances
must be carried out by Specialised
Technicians. Incorrect repair work may
Problem
The ironing programme . The
does not start
All manuals and user guides at all-guides.com
Cleaning and maintenance
Before calling the Technical Service
Possible cause
button has not been pressed.
The start/stop button has not been
pressed.
The upper support is not correctly set
to its upper position.
The automatic fuse for the household
circuit has been triggered.
General electricity supply failure.
The plug is not plugged into the
socket or is loose.
Open the filter cover.
Extract the air filter. Fig. 29.
Clean it in plenty of hot water. If necessary,
use a suitable commercial detergent.
Allow the air filter to dry.
Clean the filter support with a damp cloth.
Fit the air filter when clean and dry.
Close the filter cover.
result in damage to the appliance. However,
consult the following list of simple faults which
you may be able to solve yourself. If the
following recommendations do not solve the
problem, call our Technical Service!
Solution
Press the
Press the start/stop button.
Lift the upper part of the
appliance to its highest
position until it clicks into
position.
Connect/replace the automatic
fuse.
If the fault recurs, change from
16 amps to 10 amps.
Restart the programme when
the electricity supply resumes.
Reset the programme selector
switch according to how dry
the garment is.
Insert the plug firmly.
15
button.