Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cancelling the setting
Press the
Clock button. Press the - button until zero is
0
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
Press the
Clock button twice and make your settings as
0
described in point 4.
The oven should switch on and off
automatically
Do not allow food to stand for too long in the oven. Meat and
fish spoils easily if not kept chilled.
Example in the picture: Top/bottom heating
10:45 . The meal takes 45 minutes to cook and should be
ready at 12:45 .
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or the
2.
grill setting.
Press the
clock button.
0
3.
The
Cooking time symbol flashes.
x
Use the + or - button to set the cooking time.
4.
Press the
0
Clock button repeatedly until the
5.
symbol flashes.
You can see in the display when the meal will be ready.
Setting the time
Following a power cut or when the oven is used for the first
time, the
symbol and three zeros flash in the display. Set the
0
time. The function selector must be switched off.
Setting procedure
Press the
clock button.
0
1.
12.00 appears and the
Use the + and - buttons to set the time.
2.
After a few seconds, the time is accepted. The
goes out.
Changing from summer to winter time.
Press the
0
clock button twice and use the + or - buttons to
change the time.
%
, 200 °C. It is
y
symbol flashes.
0
0
Use the + button to set a later end time.
6.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Rapid heating
End time
With rapid heating, the oven reaches the temperature selected
more quickly.
Only use rapid heating when temperatures above 100 °C are
selected.
Only place the food in the oven after rapid heating has finished,
so as to ensure even cooking.
Move the function selector to the
1.
Use the temperature selector to set the temperature.
2.
The oven starts after a few seconds. The indicator lamp above
the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
symbol
0
button
J
position.
49
Advertenties
Hoofdstukken
Inhoudsopgave
