Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Initial Operation
Do not exceed the maximum permitted input values.
Before measuring, check the measuring device for damage such as cuts, cracks
or squeezing. A defective device must not be used. Mortal danger!
Before using for the first time, the enclosed buffer battery be inserted for the time and date. Inserting and
changing the battery can be found in Section „Maintenance and Cleaning".
After inserting the buffer battery, connect the measuring device in a standard protection socket. The
measuring device is ready for programming or operation.
Basic settings
After the first use, some parameters must be preset to allow a correct display. You can reach this mode by
pressing the „MODE" and „Continue" keys (7) for at least 2 seconds simultaneously. You now reach the
„Select device ID" menu item.
a) Select ID device
This device ID allows you to manage up to 10 electric consumers in one measuring device. In the set-
tings mode the ID number flashes in the top right display. Select the desired number (ID 0 - 9) with the
„min" (3) and „max" (4) keys and confirm your selection with the „MODE" (5) key. You will automatically
reach the next mode: „Time settings"
b) Time settings
First you select the the desired time format (12/24-h system) with the two arrow keys (3 and 4) and con-
firm your selection with the „MODE" key (5).
Select the date format with the two arrow keys (3 and 4). Available are:
dd.mm.yyyy
mm.dd.yyyy
Confirm the selection by pressing the "MODE" (5) key. You will automatically reach the next mode.
The hours display of the time flashes. Set the correct time with the arrow keys (3 and 4). After entering
the hours, you reach the minute input by pressing the „Continue" arrow key (7). Repeat these steps until
you have set day, month and year.
Confirm your settings in the year mode by pressing the "MODE" (5) key. The time starts to run and you
automatically reach the next mode.
28
for day/month and year or
for month/day and year
Advertenties
Hoofdstukken
Inhoudsopgave
