Specifications
Camera
[System]
Camera Type:
Interchangeable Lens Digital Camera
Lens: Sony E-mount lens
[Image sensor]
Image format: 35 mm full frame
(35.6 mm × 23.8 mm), CMOS image
sensor
Effective pixel number of camera:
Approx. 24 200 000 pixels
Total pixel number of camera:
Approx. 25 300 000 pixels
[Electronic Viewfinder]
Type: 1.0 cm (0.39 type)
Electronic Viewfinder
[Monitor]
7.5 cm (3.0 type) TFT drive, touch
panel
[General]
Rated input: 7.2 V
Operating temperature:
0 to 40°C (32 to 104°F)
Storage temperature:
–20 to 55°C (–4 to 131°F)
Dimensions (W/H/D) (Approx.):
124.0 × 71.1 × 59.7 mm
124.0 × 71.1 × 53.5 mm
(from grip to monitor)
5 × 2 7/8 × 2 3/8 in.
5 × 2 7/8 × 2 1/8 in.
(from grip to monitor)
Mass (Approx.):
509 g (1 lb 2.0 oz) (including battery
pack, SD memory card)
, 2.9 W
[Wireless LAN]
WW850128 (see name plate on the
bottom of camera)
Supported format:
IEEE 802.11 a/b/g/n/ac
Frequency band: 2.4 GHz/5 GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method:
Wi-Fi Protected Setup™ (WPS)/
Manual
Access method: Infrastructure mode
WW384063 (see name plate on the
bottom of camera)
Supported format: IEEE 802.11 b/g/n
Frequency band: 2.4 GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method:
Wi-Fi Protected Setup™ (WPS)/
Manual
Access method: Infrastructure mode
[Eco and energy saving]
Power consumption (Off mode):
Not available
Power consumption (Standby mode/
Low power mode): 0.5 W
Power consumption (Networked
standby mode): 2.0 W (Bluetooth) /
2.0 W (all terminals and networks
connected)
Low power mode activated:
Within 20 minutes (default)
Networked standby mode activated:
Within 20 minutes (default)
Rechargeable battery pack
NP-FZ100
Rated voltage: 7.2 V
Recommended USB AC adaptor
Input: 100-240 V
Output: 5 V
, 1.5 A or more
, 50/60 Hz
EN
13
EN