Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Avoid the danger of
death from electric shock!
B efore use, ensure that the mains voltage
available is the same as the required operat-
ing voltage for the product (220–240 V∼,
50 / 60 Hz).
B efore connecting the product to the mains
you should always check the product for any
damage.
N ever use the product if you discover that it is
damaged in any way.
T his product´s external flexible tube is non-
replaceable. Hence if it becomes damaged
you must dispose of the entire product.
T his product does not contain any parts which
can be serviced by the user. The bulbs cannot
be replaced.
O nly use the product with the supplied mains
adapter
for the type (Model No.
4
YJ-L12DOT-7.2W); all warranty claims will
otherwise expire.
N ever open any of the electrical parts or insert
any kind of object into them.
P rotect the product from sharp edges, mechani-
cal loads and hot surfaces.
D o not install with sharp fasteners or nails.
A lways unplug the mains adapter
socket before installation, dismantling or cleaning.
N ever touch the product plug or the product
itself with wet hands.
T he product must not be electrically connected
to another light chain.
I f the product is not in use for any length of
time (e.g. holidays), disconnect them from the
power supply.
I f you have any questions about the product
or are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
T he product is protected against splashes of
water (IP44) as long as the socket meets the
minimum protection standard.
T he product is only suited for use with the
included mains adapter (YJ-L12DOT-7.2W).
P lease note that the mains adapter continues
to draw a small amount of power even if the
8
GB/IE/NI
product is turned off as long as the mains
adapter is plugged into a power outlet. To
switch the product off completely, unplug the
mains adapter from the socket.
The LEDs are not replaceable.
If the LEDs fail at the end of their lives, the
entire product must be replaced.
The external flexible cable or cord of this
luminaire cannot be replaced; if the cord is
damaged, the luminaire shall be destroyed.
Keep the instructions for future reference!
U se
CARRIED OUT BY AN ADULT!
1. Remove all packaging materials and remove
the product carefully from the box. Make sure
you have sufficient space.
2. Lay the product down with the underside on
the floor.
Insert the plug of the supply lead
socket
Tighten the union nut
Plug the mains adapter
The product will start to expand slowly.
from the
Use the spikes
4
(rope can bind the eyelets of product).
For indoor installation, place the product on
an even surface and fix it with rope if possi-
ble. Otherwise, the product may not stand
stable.
Noted: Do not open the zipper which near the
bottom of product.
Disassemble the product
Release the spike
product.
Unplug the mains adapter
size of the product will reduce slowly. Under
certain circumstances, the air must be completely
pushed out by hand to store the product.
ASSEMBLY MUST BE
of the mains adapter
2
clockwise.
8
into a wall socket.
4
and rope
to fix the product
6
7
and rope
6
after use. The
4
into the
5
.
4
that fix the
7
Advertenties
Hoofdstukken
Inhoudsopgave
