Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
tures. Fire or temperatures over
130 °C can cause an explosion.
• Follow all instructions for
charging and never charge
the battery or the battery-
powered tool outside the
temperature range stated
in the operating instruc-
tions. Incorrect charging or
charging outside the permitted
temperature range may destroy
the battery and increase the risk
of fire.
Service
• Never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised cus-
tomer service centres only.
Special safety directions for
battery-operated tools
• Ensure that the device is
switched off before insert-
ing the battery. Inserting a
battery into a power tool that
is switched on may result in ac-
cidents.
• Recharge the batteries
indoors only because the
battery charger is de-
signed for indoor use only.
• To reduce the electric shock
hazard, unplug the battery
charger from the mains be-
fore cleaning the charger.
• Do not subject the battery
to strong sunlight over
long periods and do not
leave it on a heater. Heat
damages the battery and there
is a risk of explosion.
• Allow a hot battery to cool
before charging.
• Do not open up the bat-
tery and avoid mechanical
damage to the battery.
Risk of short circuit and fumes
may be emitted that irritate the
respiratory tract. Ensure fresh air
and seek medical assistance in
the event of discomfort.
• Do not use non-rechargea-
ble batteries!
• Do not use any accessories
that are not recommended
by PARKSIDE. This can result
in electric shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your charger from the
Parkside X 12 V Team
series.
Inserting/removing the
battery
1. To remove the battery (1) from
the device, press both release
buttons (2) on the battery and
pull the battery out.
GB
7
Advertenties
Hoofdstukken
Inhoudsopgave
