Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
16 Leonard
What to do if...
Problem
You cannot activate or oper-
ate the hob.
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error
INSTALLATION
WARNING! Refer to Safety
chapters.
Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Assembly
min.
500mm
Possible cause
The fuse is released.
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about the
Service Centre and conditions of guarantee
are in the guarantee booklet.
Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in units
and work surfaces that align to the
standards.
min.
50mm
Remedy
Make sure that the fuse is the
cause of the malfunction. If
the fuse releases again and
again, contact a qualified
electrician.
Serial number ...........................
R 5mm
+1
490
mm
560
min.
55mm
+1
mm
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
