Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
To enter the latest AlarmEvent data set, please
•
press ALM button in HISTORY-MODE.
The value that triggered the alarm and the
•
corresponding upper or lower limit are also shown.
With the HIST or OK/MAX/MIN button you can
•
toggle through the different Alarm Event-records (if
available).
If you press the "ALM" button again, you return to
•
the position of the last showing Alarm Event data
set in the normal HISTORY MODE.
Press and hold the "HIST" or "OK/MAX/MIN"
•
button for fast forward scrolling through the data
sets (steps of 50).
To enter normal mode again, press either SET
•
button in HISTORY-MODE or press no button for
at least 2 minutes.
RECORD:
A ring memory is used. That means that when all data sets
have been written, the oldest existing data sets are
automatically overwritten by the next new data set. On the
memory indication, the logger displays the amount of data sets
(in percentage).
Press and hold the RESET button in normal mode for three
seconds to clear the record.
TROUBLESHOOTING:
If problems occur, we recommend that you read the
corresponding section of the instruction manual in order to
become familiar with the precise function and principle of
operation of the device.
30
Advertenties
