Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
cleAninG And MAintenAnce
1. C lean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. O ver the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
•
Never immerse the appliance, plug or power cord in water.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - changing the dust bag
1. C hange the dust bag immediately once the 'dust bag full' indicator turns red, see Figure 7.
I t is possible that the indicator turns red whilst
the dust bag is not yet full. If so, then the nozzle,
hose or tubes may be blocked. These will then
need to be cleaned.
2. O pen the cover by pulling the cover release
(dust bag) upwards. Remove the dust bag from
the holder, and dispose of it in a dustbin.
3. F it a new dust bag in the holder and press into position.
4. Close the cover, and press until it clicks into place.
M ake sure that the dust bag does not become pinched by the cover. This could damage the appliance
and/or the dust bag.
note D ust bags for this vacuum cleaner are available from every major hardware store, with a statement
of the type number Bestron D00013/D0013S
cleAninG And MAintenAnce - cleaning or replacing the motor safety filter
Clean or replace the motor safety filter at least twice a year, and more frequently if the filter is visibly blocked.
1. Remove the plug from the wall socket.
2. Remove the hose from the vacuum cleaner.
3. O pen the cover by pulling the cover release
(dust bag) upwards. Remove the dust bag, see
Figure 7. Remove the motor safety filter holder,
located behind the dust bag: see Figure 8.
4. D ispose of the filter, or wash it in lukewarm water. Allow it to dry thoroughly.
5. R eturn the cleaned or new filter to its holder, and fit the holder in the appliance. Fit a dust bag. Close the
cover, and press until it clicks into place.
•
W ater could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
•
M ake sure that the dust bag does not become pinched by the cover. This could damage the appliance
and/or the dust bag.
All manuals and user guides at all-guides.com
24
user's instructions
Advertenties
Inhoudsopgave
