Advertenties
Beschikbare talen
Beschikbare talen
3
This appliance must be installed by a qualified gas installer who must also
be a qualified electrician if the appliance requires connecting to a mains
electricity supply.
After removing the packaging material from the appliance and its accesories
ensure that the hob is not damaged. If you suspect any damage do not use the
appliance and contact a qualified technician immediately.
This built-in hob is to be inserted into a cut out of a worktop. It will be electrically
connected with the mains socket below counter level especially provided for this
purpose. In all oher respects, the user of the appliance is also liable for the orderly
installation and operation - in confirmity with these instructions - according to the
Appliances Safety Law And The Applicable Regulations and Prescriptions.
Locating Your Built-in Hob
The Hob is supplied with a special seal in order to avoid any liquid infiltration in
the work top. Cut out an opening in the top of your kitchen unit that corresponds to
the measurements given in figure. Apply the self adhesive seal to all edges of the
and carefully fit the hob into the opening in such a way that the knobs will be right
side.
The leaf springs located on the lower left and right sides of the hob will fix the hob
in the opening.
4
All manuals and user guides at all-guides.com
PRIOR TO INSTALLATION, ENSURE THAT THE LOCAL
DISTRIBUTION CONDITIONS AND THE ADJUSTMENT
OF THE APPLIANCE ARE COMPATIBLE.
s
INSTALLATION
Advertenties
Hoofdstukken
