4. CLEANER MAINTENANCE
4.3 FILTER
Clean the filter
STEP 1:
STEP 2:
Remove
Take off
the dirty water tank.
the filter and debris
collector.
6. REPLACE THE BATTERY PACK
In the event that the battery pack needs to be replaced, follow the instructions below:
STEP 1:
STEP 2:
Take off 4
screws of battery cover.
battery cover.
STEP 4.2:
Follow the above instructions in reverse to reinstall the new battery pack.
STEP 3:
STEP 4:
Clean
the filter using
filter to air dry for
lukewarm water.
24Hrs before re-fitting.
Note: Only use the approved battery type (type ref.: HW5BAT) recommended by
HOOVER. Failure to do so may cause the lithium-ion battery to become a potential
hazard.
STEP 3:
Take off the
Pull out the
battery pack.
5. DISASSEMBLE YOUR CLEANER
Remove the wand
In the event that the handle needs to be disassembled, follow the
Leave the
instructions below:
STEP 1:
Take off the
clean water tank.
STEP 4:
Disconnect the
terminals to remove the
battery pack.
P7
STEP 2:
STEP 3:
Press the
spring underneath
wand while pressing
the red rubber with
the button.
a narrow tool (like a
screwdriver).
GB
Take off the