Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. USING YOUR CLEANER
3.1 MODE BUTTON / VOICE PROMPT
To use your product:
STEP 1:
Once the product is fully charged, press 3 Secs
the ON/OFF button to operate your cleaner:
The cleaner will start by default in smart mode.
The voice prompt is on and the language is GB.
The display will turn on.
3. USING YOUR CLEANER
3.2 AUTO-CLEAN
STEP 1:
Put your product onto the docking
station and check the cord and
adapter are both plugged in.
Please ensure the dirty water
tank is empty before starting
the auto-clean.
STEP 2:
Press the MODE button to change the mode:
Smart mode: suction power and water flow are automatically
adjusted based on the amount of dirt detected.
Parquet mode: medium suction and low water flow. We
recommend using this one on delicate but well sealed floors.
Max mode: max suction and max water flow.
IMPORTANT: We recommend performing the auto-clean after each cleaning session to
ensure optimum performance.
STEP 2:
Fill the clean water tank to
the MAX line.
STEP 3:
Press the auto-clean button.
P4
STEP 3:
VOICE PROMP BUTTON:
Short press: to switch between languages (GB/FR/DE/
ES/IT).
Long press (3 seconds): to turn on/off the voice prompt.
STEP 4:
The auto-clean process takes
about 150s to complete.
GB
3 Secs
3 Secs
STEP 5:
Once the auto-clean process
is completed, empty the dirty
water tank to get ready for
another cleaning session.
For dirty water tank maintenance, please
refer to "4.1 DIRTY WATER TANK" section.
Advertenties
Inhoudsopgave
