Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
If your Rowlett appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Heating element has expired
Thermal cut-out activated
Electrical Wiring
This appliance is supplied with a 3 pin BS1363 plug and lead.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
•
Live wire (coloured brown) to terminal marked L
•
Neutral wire (coloured blue) to terminal marked N
•
Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
Rowlett parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent,
and federal authorities.
Rowlett products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Rowlett.
Every effort is made to ensure all details are correct at the time of going to press, however, Rowlett reserves the right to
Rowlett Toaster IM_ML_A5_v3_20211116.indb 5
Rowlett Toaster IM_ML_A5_v3_20211116.indb 5
Probable Cause
Check the unit is plugged in correctly and switched
on
Call Rowlett agent or qualified technician
Replace the plug fuse
Check power supply
Refer to replacing instructions (on Pages 31-33)
Check your machine is safe with no obvious damage.
Disconnect from power supply and let it cool down,
then remove the bottom cover and press the re-set
switch (white-coloured)
change specifications without notice.
UK
Solution
Reset switch
2021/11/16 14:40
2021/11/16 14:40
5
Advertenties
Inhoudsopgave
