Download Inhoudsopgave Inhoud Print deze pagina

Basic Shredding Operation; Product Maintenance; Oiling Shredder - Fellowes Powershred 92Cs Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 12

BASIC SHREDDING OPERATION

Continuous operation:
NOTE: Shredder runs briefly after each pass to clear
entry. Continuous operation beyond 30 minutes will
trigger 50-minute cool down period.
ADVANCED PRODUCT FEATURES
SafeSense
®
Technology
Stops shredding immediately when
hands touch the paper entry.
SAFESENSE
TECHNOLOGY OPERATION
®
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
1
2
to activate SafeSense
look for the SafeSense
®
indicator to illuminate
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com

PRODUCT MAINTENANCE

OILING SHREDDER

If not oiled, a machine may experience diminished
sheet capacity, intrusive noise when shredding and could
recommend you oil your shredder each time you empty
your waste bin.
* Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
TROUBLESHOOTING
indicator will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
Remove Paper: When illuminated, press reverse (
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
PAPER,
CARD or CD
1
2
Plug in and put
Feed paper straight
disconnect power switch
into paper entry
in ON (I) position
and release
Auto Reverse
Stops and reverses paper
if a jam occurs.
3
SafeSense
is active and
®
working properly
®
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
Set to Off ( )
3
4
or
Hold card/CD at edge.
When finished
Feed into center of
shredding set to
entry and release
OFF ( )
Sleep Mode
Energy saving feature shuts down
the shredder after 2 minutes
of inactivity.
SLEEP MODE OPERATION
Energy saving feature shuts down the shredder after
2 minutes of inactivity.
WHEN IN SLEEP MODE
1
In sleep mode
2
3
*Apply oil across entry
Press and hold Reverse
( ) 2-3 seconds
®
indicator will illuminate and the shredder will stop shredding.
SilentShred™ Technology
Shreds without noisy disruptions.
2
insert paper
3

Advertenties

Inhoudsopgave
loading

Inhoudsopgave