Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
3. Close the roll paper cover; then tear off the roll paper.
Note:
Be sure to close the cover completely by pushing down on the middle of the
cover.
Troubleshooting
ERROR LED on or flashing
❏ Check to see that the roll paper cover is closed and check the
PAPER OUT LED. Close the cover or replace the paper if
necessary.
❏ If the printer has been printing a lot, the head may be hot. Wait
for the head to cool. Printing will resume automatically.
❏ If the autocutter is jammed, turn the printer off and then
back on.
❏ If the roll paper cover will not open, see the section below.
❏ Turn off the printer and then turn it back on. If the LED is still
flashing, call your supervisor or a service person.
Paper jam
Turn off the power and open the roll paper cover and check for a
paper jam. If there is a paper jam, remove the jammed paper and
follow the instructions in the Installing the Paper Roll section to
prepare the printer for printing.
10 TM-T90 User's Manual
Advertenties
Inhoudsopgave
