Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
- Press MODE to select goal you like to set. (the selected goal will
blink when able to set value.)
- Press SET Button to higher the goal input, hold SET button to
higher the value fast.
- Press RESET button shortly to reset the changed selected goal.
- Press MODE Button to active next optional goal to be set.
TIME + 1 min
SPEED
DIST + 0,5KM
( 0,5KM ~ 99,50Km )
ODO
( max. 999,9 Km)
CAL + 1
PULSE + 1
‼ NOTE
When you set a goals the set goal value will Count down in
•
active mode.
When goal is reached the console will notify by 4 dual acoustic
•
beep signals. The reached value will now Count up starting from
"0".
You can set more than one goal, all goals will notify when goal
•
is reached.
RESET
- Push and hold for 4 seconds to reset: Time, Dist., Cal., & Pulse
‼ NOTE
Total Count can only be reset by a batteries exchange.
•
Extra notes
- If the display is faint or shows no figures, please replace the
batteries.
- The monitor will automatically shut off if there is no signal received
after 4 minutes .
- The monitor will be auto-powered on when starting to exercise
push button w/signal in.
- The monitor will automatically start calculating when you start to
exercise and will stop calculating when you stop exercising for 4
seconds .
Cleaning and maintenance
The equipment does not require special maintenance. The
equipment does not require recalibration when it is assembled, used
and serviced according to the instructions.
⚠ WARNING
Do not use solvents to clean the equipment.
•
Clean the equipment with a soft, absorbent cloth after each use.
•
•
Regularly check that all screws and nuts
are tight.
If necessary, lubricate the joints.
•
Defects and malfunctions
Despite continuous quality control, defects and malfunctions caused
by individual parts can occur in the equipment. In most cases, it will
be sufficient to replace the defective part.
- If the equipment does not function properly, immediately contact
the dealer.
- Provide the model number and the serial number of the equipment
to the dealer. State the nature of the problem, conditions of use
and purchase date.
( 1 ~ 99)
( max. 99,9 Km/h)
( 1 ~ 999 )
( 40 ~ 240 )
Trouble shooting:
- When the display of LCD is dim, it means the batteries need to be
changed.
- If there is no signal when you pedal, please check if the cable is
well connected.
‼ NOTE
When stop training for 4 minutes, the main screen will be off.
•
If the computer displays abnormally, please re-install the
•
batteries and try again.
Transport and storage
⚠ WARNING
Carry and move the equipment with at least two persons.
•
Move the equipment and carefully put the equipment down.
•
Place the equipment on a protective base to prevent damage to
the floor surface.
Move the equipment carefully over uneven surfaces. Do not
•
move the equipment upstairs using the wheels, but carry the
equipment by the handlebars.
Store the equipment in a dry place with as little temperature
•
variation as possible.
Additional information
Packaging disposal
Government guidelines ask that we reduce the amount of waste
material disposed of in land fill sites. We therefore ask that you
dispose of all packaging waste responsibly at public recycling centres.
End of life disposal
We at Tunturi hope you enjoy many years of enjoyable use from
your fitness trainer. However, a Time will come when your fitness
trainer will come to the end of its useful life. Under 'European WEEE
Legislation you are responsible for the appropriate disposal of your
fitness trainer to a recognised public collection facility.
Technical data
Parameter
Length
Width
Height
Weight
Max. user weight
Battery size
HR. receiver
1 6
Unit of
Value
measurement
cm
84.0
inch
30.7
cm
50.0
inch
19.7
123,0
cm
inch
48.4
kg
18.3
lbs
40.3
kg
110
lbs
240
AA
2x
handgrip contact
5.3~ 5.4 Khz.
Bluetooth (BLE)
ANT+
Advertenties
Hoofdstukken
Inhoudsopgave
