Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Product description
DANGER!
Danger of injury if used other than ac-
cording to the designated use!
This can result in extremely serious inju-
ries!
Do not use the machine for preparation
of garden soil or crushing of metal pie-
ces.
TECHNICAL DATA
Type
TCS Duo-
tec 2500
Motor
Max. power
Fuse
Spped
2790 minˉ¹
Combination
with over-
sitch plug
load cut-out
Feeder funnel
for bran-
ches up to
13 mm dia
Branch feeder
for larger
branches up
to 40 mm dia
Weight
approx 51 kg
Noise level
115 dB(A)
L
WA
(2000/14/EG)
Sound pres-
88 dB(A)
sure level
Uncertainty
K = 2 dB(A)
Mass
966 x 655
SAFETY INSTRUCTIONS
Operator:
Young people under 16 years of age, and per-
sons who are not familiar with the instructions
for use, are not allowed to use the machine.
Persons under the influence of alcohol, drugs
or medication are not allowed to use the ma-
chine.
456251
TCS Duo-
tec 3000
230 V~/
400 V~/
50 Hz
50 Hz
2500 W
2900 W
16 A
16 A
2830 minˉ¹
with over-
load cut-out
for bran-
ches up to
13 mm dia
for larger
branches up
to 43 mm dia
approx 55 kg
115 dB(A)
88 dB(A)
K = 2 dB(A)
1415 x
1415 x
966 x 655
Personal protective equipment:
Wear clothing and protective equipment in
accordance with the regulations in order to
avoid injuries to the eyes, as well as to avoid
hearing impairment.
The clothing must be appropriate (tightly fit-
ting) and must not restrict movements. If you
have long hair, it is essential to wear a hair
net.
The personal protective equipment compri-
ses:
Ear protection
Protective glasses
Work gloves
Safety shoes
Working area:
No further persons, children or animals may
be in the working area of the shredder.
Keep the working area free from material to
be shredded and other objects – danger of
stumbling.
The user of the machine is responsible for ac-
cidents involving other persons or their pro-
perty.
Ensure good lighting of the working area.
Operating times:
When operating in residential areas, observe
country-specific and communally permitted
operating times according to the regulations
on noise pollution.
Work with the machine at daylight or with
good lighting only.
Operation:
Do not reach into hopper or feed chute during
operation!
The cutting disk after-runs after the machine
is switched off!
Only start up the machine, after assembly is
fully completed.
Always perform a visible inspection prior to
using the machine. The machine must be in
a safe operating condition.
Never work alone.
Immediately renew damaged or worn parts.
Only use the machine if it is in the technical
condition stipulated by the manufacturer.
Do not undertake shredding work in the rain,
snow or stormy weather. Do not use the
shredder in wet or damp surroundings.
15
Advertenties
Hoofdstukken
Inhoudsopgave
