TECHNICAL SPECIFICATIONS
UNITO LAVA Smart Water System
Dispensing water types :
Ÿ
water, Cold/Hot tap water.
Boiling capacity:
Ÿ
Heating time:
Ÿ
100°C at room temperature).
Min./Max. main pressure:
Ÿ
System max. safety pressure:
Ÿ
Max. hot water temperature :
Ÿ
Operation:
Operation via Electronic control knob, handle, UNITO
Ÿ
ANYWHERE APP(compatible with Amazon Alexa APP).
Power supply :
Ÿ
HUB power adapter:
Ÿ
Output: 4.75-5.25VDC, 0.6A (max.).
Max. power consumption:
Ÿ
Standby power consumption :
Ÿ
Safety features:
Maximum temperature fuse, Safety valve(including
Ÿ
pressure relief valve , a built-in one direction valve & on/off valve).
Dimensions:
Boiler: 187.3mm(diameter) x 409.9mm(Height),
Ÿ
Manifold: 248.6 x 105.0 x 143.3 mm, Control box: 289.9 x 220.0 x 52.5mm,
Hub: 85.2 x 81.1 x 31.3 mm.
Weight:
Total weight: 8.825kg (Faucet: 2.1kg, Empty Boiler: 4.5kg,
Ÿ
Manifold: 1.13kg, Control box: 1.0kg, Hub: 0.095kg).
Flow rate:
Ÿ
Max. water hardness :
Ÿ
CARE AND MAINTENANCE
Regular maintenance of the UNTIO LAVA Smart Water System
is required to prevent damage or downtime. Service should be
performed by qualified and certified personnel only.
Warning: Disconnect the power supply from the UNITO LAVA
Smart Water System before maintaining the unit。
Keep the UNTIO LAVA Smart Water System in a dry, clean
Ÿ
space. Minimize exposure to dust. Power button or other
controls should never be wet.
If the unit becomes wet, immediately shut it down. Wait for the
Ÿ
unit to completely dry before turning it on again.
Clean exterior surfaces of the unit with a soft, lint-free cloth.
Ÿ
Never use alcohol, paint thinner, benzene or other solvents to
clean this unit. Never use an abrasive material such as a
brush or scouring pad to clean surfaces.
Always test your cleaning solution on an inconspicuous area
Ÿ
before applying to the entire surface.
Wipe surfaces clean after applying cleaner.
Ÿ
Never expose the unit to vibration.
Ÿ
Make sure that all cabin ventilation outlets are always free
Ÿ
and clear.
In the event of mechanical/power failure or damage, do not
Ÿ
attempt to repair the system unit or wires. Call a certified
technician.
If the UNITO LAVA Smart Water System requires service,
Ÿ
please consult a certified dealer. Unauthorized service may
void the warranty.
Close/open the system valve and safety valve every 6
Ÿ
months.
Clean aerator once a year.
Ÿ
All manuals and user guides at all-guides.com
Boiling water, Ambient
4.4 Litres.
15 minutes (from 20°C to
2/5 bar (200/500 kPa).
8 bar (800 kPa).
100°C.
220~240VAC, 50~60HZ.
Input: 100-240VAC, 0.3A (max.),
1550 W.
2.3 W.
2.0 L/min(Water pressure is 3 bar ).
10° dH.
TROUBLESHOOTING
Read and follow the assembly instructions. If the UNITO LAVA
Smart Water System is not functioning, please check
troubleshooting table. If the water system is still not working
properly, disconnect power supply and contact authorized
UNITO customer service center for assistance. When calling for
assistance, please provide your product model and serial
number.
Symptom
Possible Cause
- Main water supply valve
No water
or safety valve is turned
owing, the
off.
water is
owing too
- Hoses are twisted.
slowly
The water is
- There is no or too little
sputtering or
water pressure.
is irregular
- The boiler is turned off or
not connected to power
supply wall socket.
No boiling
- Safety valve or main
water
water supply valve is
turned off.
- Faulty Safety valve(cut-
off).
RING LIGHT INDICATION
18
Solution
- Turn on the main water
supply valve or safety
valve.
- Check whether hoses
are twisted.
- Check the water
pressure. It should be
above 2.0 bar. Check a
different tap. If the
pressure is also low
there, check the mains
water tap and contact
your water supplier.
- Connect to power
supply.
- Turn on the Safety valve
or main water supply
valve.
- Contact UNITO
customer service.
Description
Standby mode.
Ambient water mode.
Boiling water mode.
First time activating boiler is not
followed. Repeat the start process as
per step of the instruction(See page 9)
and activate boiler rst time.
Timer is set to off, the water system
stops heating.
Filter needs to be replaced.
System error. First check the cable
connection in the water system, if the
cable connection is good but still
ashes in red, please contact UNITO
customer service.