Download Inhoudsopgave Inhoud Print deze pagina

Cleaning And Maintenance - Beurer SatinSkin HL 36 Gebruiksaanwijzing

Ladyshave nat & droog
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 56
4. To increase the speed setting, press the ON/OFF button
5. Guide the device slowly, steadily and without pressure over the skin with the illuminated side against
the direction of hair growth (Figure
in various directions over the skin to achieve the best result. The device can be used on dry skin or
in the shower or in the bathtub.
6. To switch off the device, press the ON/OFF button
red during battery operation, the battery is almost empty.
7. Using the trimming attachments
Small trimming attachment
Large trimming attachment
To do this, place the desired trimming attachment
8. Glide attachment
short hair. To do this, place the glide attachment for better skin contact
ment
(Figure
5
F
9. Exfoliation attachment
the shaver attachment
Travel lock
The device has a travel lock. If the travel lock is activated, it is not possible to switch on the device.
The travel lock prevents the device from being switched on by accident (e.g. when being carried in a
suitcase).
1. To activate the travel lock, press and hold the ON/OFF button
cator
will flash. The device is now locked. If you press the ON/OFF button
3
is activated, the battery level indicator
2. To deactivate the travel lock, press and hold the ON/OFF button
level indicator
flashes. The device is now unlocked.
3

6. CLEANING AND MAINTENANCE

Risk of electric shock!
Unplug the device each time before cleaning. Clean the device using only the methods specified.
1. Do not use any abrasive cleaning products or hard brushes.
2. Remove the shaver attachment
3. Remove most of the hair from the shaver attachment
4. Then clean the shaver attachment
5. Do not use the device again until it is completely dry.
). As hair doesn't always grow in one direction, guide the device
C
/
8
9
: 4 mm
8
: 8 mm
9
: For a pleasant feeling on the skin while shaving. Especially suitable for very
7
).
: Gently removes dry, dead skin cells and prevents ingrowing hairs. Remove
6
by gently pulling it out. Attach the exfoliation attachment
5
5
from the shaver head
5
and the device thoroughly under running water.
2
again. If the battery level indicator
2
you can cut your hair to two different lengths:
/
onto the shaver attachment
8
9
flashes briefly.
3
1
with the cleaning brush.
5
15
again.
on the shaver attach-
7
for 3 seconds. The battery level indi-
2
2
again for 3 seconds. The battery
2
(Figure
).
D
3
flashes
(Figure
).
5
E
(Figure
).
6
D
while the travel lock

Advertenties

Inhoudsopgave
loading

Inhoudsopgave