Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Separate the packaging elements and
dispose of them in accordance with
local regulations.
Marking to identify the packaging
material.
A = Material code, B = Material number:
B
1-7 = Plastics, 20-22 = Paper and
A
cardboard
CE labelling
This product satisfies the requirements
of the applicable European and national
directives.
Manufacturer
Suitable for use in a bath or shower.
4. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Shaver head
1
ON/OFF button
2
Battery level indicator
3
Charging and storage station
4
Shaver attachment
5
5. USAGE
The device should only be charged with a mains adapter with an output of min. 1 A.
1. Fully charge the device for approx. 90 minutes before the first use. You can either charge the device
directly (Figure
A
ing and storage station
delivery scope) or via a device with a suitable interface.
2. The battery level indicator
level indicator
3
approx. 60 minutes of operation.
3. Press the ON/OFF button
) or connect it to the charging and storage station
or the device to a suitable mains adapter (mains adapter not included in
4
flashes during charging. Once the battery is fully charged, the battery
3
stays on continuously. The device is now ready for use. One charge is sufficient for
to switch on the device.
2
Read the instructions
Separate the product and packaging
elements and dispose of them in
accordance with local regulations.
Disposal in accordance with the Waste
Electrical and Electronic Equipment EC
Directive – WEEE
Direct current
The device is suitable for use with direct
current only
United Kingdom Conformity Assessed
Mark
Exfoliation attachment
6
Glide attachment for better skin contact
7
Trimming attachment (4 mm)
8
Trimming attachment (8 mm)
9
Protective cap
10
14
(Figure
). Connect the charg-
4
B
Advertenties
Hoofdstukken
Inhoudsopgave
