Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NOTE:
The jack connections of the input and output are configurable via the mo-vis
Configurator Software. Please see the Installation Manual for more information.
The LED shows the status of the device:
Status
Operational
Powersave
Warning
Error
NOTE:
A warning will block certain functionality of the Multi Swing, while an error
will block the arm and the outputs completely.
NOTE:
You will not notice that you are in powersave mode. It just means that after 1
minute, the motor will draw less current to save the battery of the power chair.
Connection with the power wheelchair
A power wheelchair usually consists of minimum two modules:
•
Power module: connected to the batteries and the electric motor of the wheelchair.
•
The joystick module: standard joystick on the power wheelchair that can be operated
by the user to control the wheelchair.
Both modules are connected to each other and can send each other signals.
The Multi Swing 2G has an XLR plug, which can be connected to either the power module
or the joystick of the wheelchair.
Safety features
The Multi Swing 2G holds some safety features:
•
The Multi Swing 2G has a configurable output which can inhibit driving of the
wheelchair when the joystick is not in the end position (see Installation manual).
•
The arm can always be pulled away manually if needed, without damaging the
mechanics.
CAUTION:
12
Color
Green
Green
Orange
Red
It is advised to only do this in case of emergency and not regularly.
Timing
Continuously
on
Heartbeat
Flash
Flash
Count
/
/
See Installation
manual
See Installation
manual
Multi Swing 2G User manual
Description
Normal opera-
tion
Powersave
Part of the
functionality is
disabled
Something
went wrong
Advertenties
Inhoudsopgave
