Limited liability
mo-vis accepts no liability for personal injury or damage to property that may arise from
the failure of the user or other persons to follow the recommendations, warnings and
instructions in this manual.
CAUTION:
This product should only be installed by a qualified service engineer.
NOTE:
All mo-vis user manuals can be found at
can be consulted in PDF format.
NOTE:
In case any serious incident occurs in relation to this device, this should be
reported immediately to mo-vis and the competent authority of the Member State in
which the user is established.
Intended use
The Multi Swing 2G is a versatile, motorized arm to mount on a powered wheelchair. With
this arm, devices such as a chin joystick can be positioned to drive, and the arm can be
moved upwards or sideways by pressing a button whenever needed.
The Multi Swing 2G is intended to be fitted on any power wheelchair with a 24 V
connection.
CAUTION:
This device is only intended to support auxiliary wheelchair functions.
Features
The Multi Swing 2G:
•
Is designed for the use of a chin control system, but it can also be mounted and
used for the attachment of small and lightweight communication tools, such as a
smartphone or tablet. The maximum weight is 1 kg (35.27 oz) at a maximum distance
of 55 cm (21.65 in)
•
Can swing away in several directions (up-down / left-right), depending on the
installation method and parameter settings
•
Is attached to the rear of the wheelchair's backrest.
For easy mounting, mo-vis proposes two different bundles. See
on page 13
for more information.
•
Has 1 input (red) and 2 output jacks (yellow and green). You can connect any 'normally
Multi Swing 2G User manual
http://www.mo-vis.com
Parts and accessories
where they
9