Download
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Kärcher Handleidingen
  4. Hogedrukreinigers
  5. HDS-E 8/16-4M 12kW
  6. Originele gebruiksaanwijzing

Kärcher HDS-E 8/16-4M 12kW Originele Gebruiksaanwijzing pagina 25

Verberg thumbnails Zie ook voor HDS-E 8/16-4M 12kW:

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 56
Maintenance and care
Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Set the appliance switch to "0/OFF".
 Shut off water supply.
 Open the hand spray gun.
 Turn on pump shortly (appr. 5 seconds)
with device switch.
 Pull main plug out of socket with dry
hands only.
 Remove water connection.
 Activate hand spray gun until device is
pressure less.
 Lock the trigger gun.
 Allow device to cool down.
Your Kärcher vender will inform you
about the performance of a periodic
safety inspection resp. signing of a
maintenance contract.
Maintenance intervals
Weekly
 Clean the sieve in the water connection.
 Clean the fine filter.
 Check oil level.
Caution
In case of lacteous oil inform Kärcher cus-
tomer service immediately
Monthly
 Clean the sieve in the safety block.
 Clean filter at the detergent suck hose.
After 400 operating hours, at least annually
 Check the calcification degree of the
boiler and consider having it cleaned by
customer service.
After 500 operating hours, at least annually
 Oil change.
Maintenance Works
Clean the sieve in the water connection
 Take out sieve.
 Clean sieve in water and reinstall.
Cleaning the fine filter
 Unpressurize the appliance.
 Unscrew the fine filter from the boiler.
 Remove the fine filter and the filter insert.
 Clean the filter with clean water or com-
pressed air.
 Reinstall in reverse sequence.
Clean the sieve in the safety block
 Loosen covering nut and take off hose.
 Take out sieve.
Note: If necessary turn in screw M8 appr. 5
mm inwards and therewith pull out sieve.
 Clean sieve in water.
 Push sieve inwards.
 Put on hose.
 Tighten covering nut firmly.
Clean filter at the detergent suck hose
 Take out detergent suck supports.
 Clean filter in water and reinstall.
Oil change
 Ready a catch bin for appr. 1 Liter oil.
 Loosen release screw.
Dispose of old oil ecologically or turn in at
a gathering point.
 Tighten release screw.
 Fill oil slowly up to the MAX marking.
Note: Air pockets must be able to leak out.
For oil type refer to technical specifica-
tions.
Troubleshooting
Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
– 8
EN
25

Advertenties

loading

Gerelateerde Handleidingen voor Kärcher HDS-E 8/16-4M 12kW

Gerelateerde Producten voor Kärcher HDS-E 8/16-4M 12kW

Deze handleiding is ook geschikt voor:

Hds-e 8/16-4m 24kwHds-e 8/16-4m 36kw