Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Installation
The effect light is attached to the ceiling or on a suitable crossbeam with its mounting bracket.
•
Mount the mounting bracket on top of the device with its thumb screws.
•
Attach the effect beamer to the ceiling or on a suitable crossbeam with the mounting bracket. The assembly
must never swing freely.
•
Secure the device with assembly equipment that is compatible with the attachment surface and suitable
for carrying the weight of the effect light.
•
Additionally secure the installation with a suitable safety restraint cable or a safety net. The safety restraint
cable or the net must be designed to support the effect light in the event of failure of the main support system
independently of the main attachment.
•
Set the desired inclination angle and tighten the thumb screws well.
Operating Modes
The following table shows the different operating modes. The desired operating mode is set via the DIP switches
at the back of the device.
DIP switch > ON
Function
1-8
DMX operation, setting the DMX address, see "DMX operation"
9
Automatic mode with/without sound-to-light control
9, 10
Automatic mode with fast-changing effects
- - -
Slave mode
10
Slave-mode (slave device reacts opposite to master device)
22
Advertenties
Hoofdstukken
Inhoudsopgave
