Testing The Rccb - ABL Wallbox eMH1 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor Wallbox eMH1:
- Installatiehandleiding (36 pagina's) ,
- Gebruiksaanwijzing (34 pagina's) ,
- Gebruiksaanwijzing (36 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Wallbox eMH1 – Testing the RCCB
24
|
Testing the RCCB
To ensure the continuing safe operation of the wallbox, the function of the RCCB must be tested regularly
according to locally applicable regulations (e.g. every 6 months in Germany): For this purpose, the RCCB
has a push button with which to initiate the test function.
NOTE
ƒ The Wallbox eMH1 is available with or without integrated RCCB.
ƒ Should your Wallbox eMH1 not have an integrated RCCB, one must be present upstream in the
domestic power supply.
Proceed as follows to test the RCCB:
1
Open the housing cover of the wallbox using
the key supplied and flip it up.
y Wallboxes without integrated RCCB:
The RCCB must be installed upstream in
the domestic power distribution: open the
domestic power distribution box.
2
Locate and press the push button engraved
T or marked Test.
y The RCCB should now trip and flick
its pivot lever into the centre position
(connection to the electricity grid is
interrupted).
Now flip the pivot lever first to the 0 position
3
and then back to the I position.
4
Close the housing cover of the wallbox and/
or the domestic power distribution box.
Danger
Dangerous electrical currents
Should the RCCB malfunction during testing, you must not continue to operate the wallbox under any
circumstances!
ƒ Contact a qualified specialist electrical contractor to have the error resolved.
Advertenties
Inhoudsopgave
