Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Machine settings
Setting
BUZZER permanent off
Water hardness
Water contains, a variable quantity
of limestone and mineral salts of
which quantities vary according to
geographical locations thus vary-
ing its conductivity values.
Relevant variations of the conduc-
tivity of the water compared to
those prefixed by the factory could
slightly influence the residual hu-
midity of the laundry at the end of
the cycle. Your dryer allows you to
regulate the sensitivity of the dry-
ing sensor based on conductivity
values of the water.
Hints for test institutes
Parameters possible to checked by the Test Institutes:
• Energy consumption (corrected with final humidity)
during the cupboard dry cotton cycle with nominal
load.
• Energy consumption (corrected with final humidity)
during the cupboard dry cotton cycle with half load.
• Final humidity (during cupboard dry cotton, iron dry
cotton and cupboard dry easy care)
28
All manuals and user guides at all-guides.com
1. Turn the programme selector to any programme.
2. Press simultaneously the QUICK and LONG ANTICREASE buttons and
hold down for approx. 5 seconds.
3. The buzzer is by default always off.
1. Turn the programme selector to any programme.
2. Press simultaneously the QUICK and START/PAUSE buttons and hold
down for approx. 5 seconds. The current setting is on the display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro S/cm
–
high conductivity >600 micro S/cm
3. Press the START/PAUSE button sequentially until you set desired level.
4. To memorize setting press simultaneously the the QUICK and START/
PAUSE buttons or turn knob to O
• Condensation efficiency (corrected with final humidi-
All the cycles have to be checked in accordance with EN
61121 (Tumble dryers for household use – Methods for
measuring the performance).
Implementation
off
position
ty) during cupboard dry cotton cycle with nominal and
half load
Advertenties
Hoofdstukken
Inhoudsopgave
