PROPERTIES OF THE TOOL
The drill and screwer is a universal portable tool which does not require external power supply for do-it-yourself enthusiasts
designed to drill holes in distinct materials (e.g. wood and wood-derived materials, metals) and to screw and unscrew bolts. Its
special advantages will be appreciated by DIY enthusiasts realising assembly and fi nishing jobs. The tool has been designed
solely for domestic work and must not be used professionally, i.e. in workshops and for remunerable jobs. A correct, reliable and
safe functioning of the electric tool depends on its proper use, so:
Before you proceed to operate the device, read the manual thoroughly and keep it.
The supplier will not be held responsible for any damage resulting from the safety regulations and the recommendations indicated
hereby not being observed.
EQUIPMENT
The device is supplied complete and does not require assembly. The drill and screwer is supplied along with a battery, a power
pack for the battery charging.
TECHNICAL PARAMETERS
Parameter
Catalogue number
Operating voltage
Rotation (idle)
Maximum torque
Noise level
- acoustic pressure
- LWA power
Protection grade
Insulation class
Level of vibration (drilling / screwdriveting)
Mass
Tool chuck
Max. drilling capacity in steel
Max. drilling capacity in wood
Max. drilling capacity in concrete
Battery
Battery capacity
Power pack
Input voltage
Mains frequency
Output voltage
Rated power
Input current
Time of charging
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
O R I G I N A L
12
EN
Unit of measurement
[V]
[min
]
-1
[Nm]
[dB]
[dB]
[m/s
]
2
[kg]
[mm]
[mm]
[mm]
[mm]
[mAh]
[V~]
[Hz]
[V]
[W]
[mA]
[h]
I N S T R U C T I O N S
Value
78972
18 DC
0 - 350 / 0 - 1300
22
83,7 ± 5,0
95,8 ± 5,0
IP20
III
2,71 ± 1,5 / 8,76 ± 1,5
0,78
0,8 - 10
10
10
-
Li-ion
1300
230
50
21 DC
15
400
3-5
78974
18 DC
0 - 350 / 0 - 1300
24
83,7 ± 5,0
95,8 ± 5,0
IPX0
III
2,71 ± 1,5 / 8,76 ± 1,5
0,83
0,8 - 10
10
10
10
Li-Ion
1300
~230
50
21 DC
15
400
3 - 5