Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Basic working techniques
Mitre cutting
The cutting arm can pivot up to 45° degrees. There is a
marking at 22.5°.
•
Loosen the lock knob for miter cutting and set the required
angle.
•
Lock the knob.
Plunge cutting
The cutting arm is spring loaded and adjustable up and down.
•
Loosen the lock knob for the depth adjustment. With the
handle on the cutting arm the cutting blade can adjusts up
and down and create a plunge cut in the work piece.
Transport and storage
Stop the motor and disconnect the power cable before lifting
or moving the machine.
•
Secure the equipment during transportation in order to
avoid transport damage and accidents.
•
Ensure that the conveyor cart is locked and that the
extension slide is locked in its inner position.
•
Store the equipment in a lockable area so that it is out of
reach of children and unauthorized persons.
•
For transport and storage of Blades, see the section
"Blades".
•
Lift the machine at the short ends.
All manuals and user guides at all-guides.com
OPERATING
– 15
English
Advertenties
Hoofdstukken
Inhoudsopgave
