Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.3 Interior finish
Mark the opening of the return (2x) and
remove the piece with a drill .
In order to attach the lining, the hung-profile
is screwed to the inside of the pool at 20cm
intervals . (stainless steel screws 4x30mm)
Ensure walls are dust-free to avoid irregu-
larities in the liner . If you prefer a soft side
surface, you must screw the fleece in place
together with the hung profile or glue onto
the walls .
Unfold the liner in such a way that the
corners of the liner correspond with the
corners of the pool . Slide the edge of the
liner into the Hung-profiles, ensuring that
the corners of the liner match up well
below . The pool can now be filled with a
few inches of tap water .
Stick the seal on the wall and push the
return (2x) through the opening . On the
outside, tighten the return until it is secu-
rely in place .
1
Liner overhoeks in
het hungprofiel plaatsen
4
If you want to include an underwater light,
1
you must first drill the hole (25 mm dia .)
for the connector to guide the cable out of
the pool .
Poser le liner diagonalement
Determine the position, preferably 70 cm
au profil hung
(28 in) below the border edge, and in the
middle of a plank . The position of the liner
needs to be 100% correct and the liner
4
should have min . 18°C so that there is
sufficient elasticity .
1
Put the liner diagonally
in the hung-profile
4
On bare feet and using a plastic squee-
gee, remove the folds in the liner and
press the liner well into the corners of
the pool . Before making the incision into
the liner for the skimmer hole, fill the
pool to a few inches below the position
of the water return opening . Please
follow the illustrations included in the
skimmer and water return's packaging .
Now you must place the coupling and
connect it to the tap via a hose (see
technical section: 2 .4 .3 Connections) so
that the bath can be further filled .
3
2
An opening must be cut for the skimmer
3
and the water return device .
tIp: Store the liner some days in advance
at room temperature .
You can tape the corners of the pool in
order to prevent folds in the liner .
2
3
2
During the filling of the swimming pool
the wood structure on the outside should
be filled in gradually .
51
Advertenties
Hoofdstukken
Inhoudsopgave
