Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Time-controlled activation
Time-controlled arming
Description
The exit delay time must be entered by the
safety company in charge. Not in compliance
with VdS.
There are ______ seconds available for exit-
ing the premises before the system is armed.
15 : 13
22.11.2005
MENU
Procedure
1. Call up the input field for time-controlled
arming. Press the center
The input field for the time-controlled arm-
ing code will be displayed.
ID:0
CO:
AREA
PROG.
2. Start time-controlled arming.
Enter ID (1 to 3 digits) for ID 7, e.g. enter
007. Enter code (0 to 6 digits), e.g. 123123;
time-controlled arming starts automatically
after entry of the digits. Only press the
"ENTER" key if the code is < 6 digits.
ID: 007 CO:
_ _ _ _ _ _
AREA
PROG.
All manuals and user guides at all-guides.com
key.
- 9 -
3. Time-controlled arming is activated.
The delay time has started. The buzzer will
sound during the exit delay time. The room
must be exited within the programmed time
of ... seconds.
ARMED IN
. . . . . s
CANCEL
The left
key can be used to cancel the
arming procedure if needed.
4. Time-controlled arming is active.
After the door is closed, the system is
armed, which is indicated by a buzzer
sound of 3 seconds. The following mes-
sage will appear on the display.
AREA
ARMED
Advertenties
Hoofdstukken
Inhoudsopgave
