Advertenties
pack should not be heated, opened, punctured, destroyed or thrown into a fire.
32. Old depleted or used batteries should be removed from the device and
disposed of or recycled in accordance with national waste disposal regulations.
Device Description: (handheld vacuum cleaner)
1. Battery status
5. WAND
9. Button ON. / OFF.
13. 2-in-1 upholstery
brush
- BATTERY
Insert the battery into the bottom of the device, when correctly installed, you will hear a connection sound. Pay
attention to the direction. (FIG. 1)
Folding the dust container
First, insert the lower plastic chip into the hole in the main part, and then lock the upper cover with the upper lock in
the main part. (FIG. 2)
CONNECTING THE BRUSH
Connect the upper part of the brush to the suction hole of the vacuum cleaner or pipe when properly installed, you will
hear a locking sound. (FIG. 3)
CONNECTION TO THE PIPE
Insert the upper end of the pipe into the main opening of the dust container and you will hear a locking sound (FIG. 4)
Connecting the electric brush and vacuum cleaner
Insert the top of the electric brush into the main opening of the dust container (fig.5)
- Connecting the accessory brushes to the main machine
Insert the accessory brushes into the main opening of the dust container or vacuum cleaner tube (FIGS. 6,7)
LOW SPEED, HIGH SPEED, OFF
Press the On/Off button to turn the unit on/off. (9)
Use the TURBO button (8) to change from low speed to high speed.
Charging the vacuum cleaner
Use only the original charger/Adapter.
Plug in the adapter, when charging, the light will turn red, when the battery is charged, the light will turn blue
Batteries can be charged independently or in the device.
Clean after each use
Press the dust container release button (2) to release the bottom of the dust container (3), then press the bottom button
to release the lower dust container cover(FIGS. 9,10). It is recommended to clean the dust container after each use.
Cleaning the dust container
a) Press the button to release the lower dust container cover to eject the dust (FIGS. 9, 10)
(b) Remove the filter, as shown in FIG.14, and clean or replace it. (FIG.11)
(c) Clean the filter under running water and dry it under sunlight. Contact your dealer to purchase a new filter. Filter
2. Dust cup release button 3. Dust cup
6. Electro brush release
button
10. Battery release button
14. Long crevice brush
7.Electro brush
11. Rechargeable
battery
15. Power adapter
6
4. Tube release button
8. Turbo button
12. Button for emptying the dust
container
16. Wall bracket
Advertenties
