Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Before use for the first time
Remove the vacuum cleaner from the packaging, and remove all packaging materials.
Use
Filling the tank with water
1.
Disconnect the plug from the wall socket.
2.
Unscrew the pressure cap (10) on the water tank by turning it anticlockwise,
and remove the cap.
3.
Fill the water tank with maximum 1.5 litres water (enough for 1hour steaming)
with the help of the measuring cup (20) and funnel (19) (see figure 2). We
recommend that you use distilled water to prevent lime deposits in the steam
boiler. The use of hot water reduces the power consumption.
4.
Fit the pressure cap onto the water tank.
5.
Fasten the pressure cap by turning it clockwise.
6.
Dry the exterior of the water tank with a dry cloth.
Figure 2
Fitting the accessories
All accessory parts are provided with a locking mechanism. To this end, the locking
plug is to be "clicked" into the appropriate opening. To release the accessory, just press
the locking part and pull it out. Should this prove to be difficult we would recommend
that you coat the parts with a little grease.
PLEASE NOTE
The accessories get hot when cleaning for a long time! You should be aware of this,
especially when changing accessories while cleaning.
Floor brush (3)
For cleaning larger areas such as carpets or floor coverings.
The floor nozzle can be used with or without cloth. However, sensitive surfaces should
be cleaned with cloth. Press the spring clips down to fit the cloth and then release the
spring clips (see figure 3).
28
EN
v 090523-05
All manuals and user guides at all-guides.com
Filling the tank with water
User's instructions, Steam cleaner
DWJ5280
Advertenties
Inhoudsopgave
